Netcomm NTC-990 Manuel d'utilisateur télécharger pdf (Page 50)

The Active Routing table at the bottom will show the new route added as shown below:

Example:

If you have a router on the Ethernet side of the Cellular Router with a gateway 192.168.1.5 that interfaces

to network 10.123.0.0/16 and you want to get to a device on that network then you enter:

10.123.0.0 in the Destination IP address field

255.255.0.0 in the IP Subnet Mask Field

192.168.1.5 in the Gateway IP address Field

The lower the metric value the higher the priority this routes has over other routes.

Revision 1.55 NetComm Limited

March 2009

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 71 72

Pas de commentaire

Netcomm NTC-990 Manuel d'utilisateur Page 50