Netcomm Wireless Network Device NP643 Manuel d'utilisateur télécharger pdf (Page 19)

NP643 IEEE 802.11g PC Card Adapter 19

YML786 Rev1

Field Description

Please enter a key. If you are joining an existing network, ask the

Administrator for the key. If you are setting up the network, create

a key; any combination of letters and numbers up to 32 characters

with no spaces.

Auth. Mode: There are three modes available to choose from:

• Open Authentication – the sender and receiver do not share

a secret Key for communication. Instead, each party generates

its own key-pairs and asks the other party to accept it. The key

is regenerated when the connection is established every time.

• Shared Authentication – the sender and receiver shares the

common key for data communication, and the key is used for

extended length of time.

• Auto – requires communication to be established, and

automatically use the proper authentication mode.

The following will only be activated to allow for conﬁguration

when Encryption is enabled.

Default Key: Select one of the 4 keys to use.

Network Key: Choose the encryption, either in HEX or ASCII formats, and enter

the password in the blank space.

Key Length: Select 64 or 128 bits as the length of the keys

Key Format: ASCII or HEX

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Pas de commentaire

Netcomm Wireless Network Device NP643 Manuel d'utilisateur Page 19