Netcomm Wireless Network Adaptor NP545 Manuel d'utilisateur télécharger pdf (Page 10)

NP545 User Guide YML866Rev1

10 www.netcomm.com.au

2. Edit the Authentication and Security tab

Figure 3-3 Add Proﬁle – conﬁguration

• Authentication Type – Three options, Open System, Shared-Key System, LEAP,

WPA/WPA2,

WPA-PSK, WPA2-PSK

• 802.1x Setting – It enables when Authentication Type is setting to WPA/WPA2.

• Encryption – Displays which encryption type that the driver is using. When you select Open

System, Shared-Key System as Network Authentication, there are two options: WEP and

Disabled. If you select WPA-PSK as Network Authentication, there are TKIP and AES options

instead of WEP and Disabled.

• Wep Key – Key #1, Key #2, Key #3, Key #4, the Key groups. You can enter 10 hexadecimal digits

(any combination of 0-9, a-f, A-F) or 5 ASCII characters for 64-bit (also called 40bits) encryption. You

can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F) or 13 ASCII characters for 128-bit

(also called 104bits) encryption.

• WPA Preshared key – When you select WPA-PSK or WPA2-PSK Authentication, you need to enter

the WPA Preshared key. This key can be from 8 to 63 characters and contain special characters

and spaces.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Netcomm Wireless Network Adaptor NP545 Manuel d'utilisateur Page 10