Netcomm Wireless Access Point NP720 Manuel d'utilisateur télécharger pdf (Page 22)

Access Point Setup

Security Profile Screen

This screen is displayed when you select a Profile on the Security Profiles screen, and click the

Configure button.

Figure 12: Security Profile Screen

Profile Data

Enter the desired settings for each of the following:

Profile Name

Enter a suitable name for this profile.

SSID

Enter the desired SSID. Each profile must have a unique SSID.

Wireless Band

Select the wireless band or bands for this profile. If your Wireless

Access Point only has a single band, then only 1 option is available.

Security Settings

Select the desired option, and then enter the settings for the selected method.

The available options are:

• None - No security is used. Anyone using the correct SSID can connect to your network.

• WEP - The 802.11b standard. Data is encrypted before transmission, but the encryption

system is not very strong.

• WPA-PSK - Like WEP, data is encrypted before transmission. WPA is more secure than

WEP, and should be used if possible. The PSK (Pre-shared Key) must be entered on each

Wireless station. The 256Bit encryption key is derived from the PSK, and changes fre-

quently.

• WPA2-PSK - This is a further development of WPA-PSK, and offers even greater secu-

rity, using the AES (Advanced Encryption Standard) method of encryption.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 117 118

Pas de commentaire

Netcomm Wireless Access Point NP720 Manuel d'utilisateur Page 22